AbuseMark Naze32 Rev 6C (Acro) Flight Controller

AbuseMark

This is the Rev 6C. The original AbuseMark Naze32 Flight Controller in a brand new version. This batch is Black.

  • STM32F103CBT6 32-bit ARM Cortex M3 processor (72MHz, 3.3V)
  • Invensense MPU6500 MEMS accelerometer + gyro
  • BMP280 Barometer
  • Built-in Micro-USB for programming/firmware update
  • 36x36mm size, 5 gram weight w/o headers
  • Made in JAPAN
  • Shipping with 16V input capable voltage regulators

These come with pin headers (right angled), NOT soldered to the board.

Naze32 rev6 Features:

  • USB on right side
  • PPM/PWM input as through-hole
  • 3.3V, I2C on standard-size headers
  • Fully pinout compatible with rev5 accessories (OSDoge etc)
  • SBUS Inverter
  • Spectrum satellite
  • MPU6500
  • Sonar pads w/resistors added for direct connection to 5V sonar
  • All extra pads (FT, GP, A5) on top, only sonar on bottom
  • BMP280 barometer
  • 16mbit flash
Specs:
  • 36x36 mm (30.5mm Mounting)
  • 5.3 grams (no headers, 7.3 grams with)
  • 2000 degrees\second 3-axis MEMS gyro + accelerometer (MPU6500)
  • Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line

Included:
    • 1 x Acro Naze32 rev6
    • 1 x 2x5 header
    • 1 x 3x6 right angle header
    Please Note: Naze32 Rev 6 flight controllers are a new design and some changes have been made that are different from the Rev 5 flight controller. Please keep in mind that when the board is connected to a fully assembled multi rotor a direct connection to USB port on a computer can supply the entire multi rotor with 5 volts of power, please pay attention and make sure all parts are connected properly.


    Type: Electronics